A pole saw is a garden tool that has a chainsaw on a stick-based surface, and a gas pole saw simply uses gas for its operation. Many people prefer to use a gas pole saw as it saves a lot of manual efforts as well as saving time. A gas pole saw is a tool that is mostly used for garden areas and for tree maintenance.
Uses
Gas pole saws are very effective and, as those saws are attached to the poles, one can reach the much needed height without any difficulty. If a task is related to cutting off tree branches or any other specified material that is placed at a height, then a gas-powered saw is the best choice.
With a gas pole saw, tree maintenance would be a no more complicated process. It is the perfect tool that can be used for multiple purposes. So, when you have to hack down the branches, there is no need to arrange a giant ladder. You can stand on the ground itself and conduct all the operations using a gas pole saw in a hassle free manner.
If there are lots of trees in your farm, house or any other premises, and the branches are really widespread, then for timely and proper maintenance, you should choose a gas pole saw over any other pole saw. It is very easy to use and you will find the entire experience of handling this tool highly comfortable. The task will be finished very early and you will not face any sort of inconvenience in the process.
Working mechanism
A gas pole saw is better than an electric one because of the exceptional features like strength and effectiveness. Many people complain that a gas pole saw is a bit heavier than the electric model, but you should keep in mind that its design is made in such a way so that it becomes easy to balance the tool.
Gas-based pole saws are supported with a motor and there is a gas to oil ratio that you have to maintain. Generally, the gas to oil ratio should be around 50:1. The gas that is used in the gas pole saw is non-alcoholic and the quality of oil should be at least two cycles. The air filters are to be cleaned before using such tool and after regular use, and you must replace the air filters if needed.
In the modern day, the gas pole saw operations can be conducted with the help of supported buttons. But the exact way of working may vary from one model to the other. When you will buy such tool, then everything will be mentioned in the instruction manual. Make sure that there is no gas leakage, metal burr, sparking etc. These things are important to consider from the safety point of view.
When you are starting a tree pruning task, then increase the chain tension and make it loose once the task has been completed. It is highly important that, once the cutting process is over, you should loosen the chain, otherwise the tool may get damaged.
Once you have finished the task then make sure to clean the pole saw with a wet rag. Put it in a proper case or storage area to avoid any sort of mishandling.
Some suggestions
So, if you are thinking to buy a gas pole saw, make sure that its motor support is good enough. Choose at least a 25cc to 35 cc motor for best performance. Always buy the product from a reputed brand and make sure that there is a reasonable warranty period with the product.
There are different types of gas pole saw models, thus you should read the instructions given in the user manual. Make sure to follow the safety guidelines as mentioned in the product manual, and also pay attention to its maintenance tips.